A well-functioning electrical system is essential for maintaining a safe and comfortable living environment.
However, wear and tear can take a toll on your home’s electrical system over time, leading to issues that require immediate attention.
Of course, when your lights go out, your outlets catch fire, or when someone gets electrocuted while trying to open the fridge are some pretty obvious signs of a problem with your electrical system.
There’s no need to get to this point, however, as there are at least 5 signs to show you that your electrical system is under stress and you must act quickly.
Table of Contents
Exposed Cords and Electrical Wires
Exposed cords and electrical wires are always a serious red flag. It’s the most obvious sign that your electrical system needs some work, regardless of whether it’s currently working or not.
Exposed cords and wires are a serious issue waiting to happen. There are so many things that could go wrong. Firstly, they are extremely dangerous, especially if they are in the living quarters.
Usually, such wires are seen in basements and attics, which is (let’s say) better. On the other hand, if you use these areas frequently, and especially if your kids or pets have access to them, you must immediately take care of this issue.
Moreover, even if no kids or pets are in danger, rodents love to chew on electrical wires, so having some exposed cords is just a very nice invitation for them to cause you problems.
The worst part is that a single rat chewing your life wire can cause a massive fire that will engulf your home in mere minutes.
Thus, if you value your life whatsoever, such death traps should be fixed first and foremost.
Frequent Circuit Breaks
Frequent circuit breaks can be a frustrating and concerning issue within your home’s electrical system.
Circuit breakers’ main function is to protect your electrical system from overloads and short circuits. However, if you are dealing with frequent circuit breaks, it’s essential to understand the potential causes and take appropriate action.
One possible cause of frequent circuit breaks is an overloaded circuit. An overloaded circuit occurs when you have connected too many devices or appliances to a single circuit, exceeding its capacity to handle the electrical load.
This often happens in areas of the house where multiple high-wattage devices are being used simultaneously, such as the kitchen or the living room.
To address this issue, you can redistribute the load by plugging appliances into different circuits or consider upgrading the circuit to accommodate the increased demand.
Another possible cause of frequent circuit breaks is a short circuit.
This happens when there is a direct connection between the hot, neutral, or ground wires. This connection creates a pathway for electricity to flow outside of its intended circuit, causing a surge of electrical current and triggering the circuit breaker.
Damaged or frayed wires, faulty outlets or switches, or faulty appliances can cause short circuits. Therefore, it is essential to quickly identify and resolve the short circuit’s source.
This often requires the assistance of a qualified electrician who can inspect the wiring, outlets, and appliances to locate the problem area and make the necessary repairs.
It is important not to ignore frequent circuit breaks, as they can indicate an underlying issue that could pose a safety hazard. Circuit breaks protect your home from electrical fires and other electrical accidents.
However, if the circuit breaker tripped frequently, it may not provide adequate protection. Ignoring the problem or repeatedly resetting the breaker without addressing the main issue behind it can lead to more severe electrical issues, such as overheating wires or electrical fires.
Electrical Outlet Discolouration
Discolouration around electrical outlets is an alarming sign that your home’s electrical system requires attention. Dark or burnt marks on the outlets may indicate overheating or arcing within the wiring. Over time, this can lead to electrical failures and potentially cause electrical fires.
Suppose you notice any discolouration around your outlets. In that case, it is crucial to have a professional electrician inspect the wiring and make any necessary repairs or replacements to ensure the safety of your home.
Flickering Lights
This may seem like a minor annoyance, but it can signify underlying electrical problems.
If you notice that the lights in your home frequently flicker or dim, it could indicate loose wiring connections, a faulty fixture, or an issue with the electrical panel. It is essential not to ignore this sign, as it could potentially lead to more severe electrical issues.
Still, don’t rush to call the electrician. First, check if the bulb hasn’t gone loose. Over time, the electrical connections within light fixtures can become loose due to vibrations, temperature fluctuations, or poor initial installation.
When the connections are loose, the electrical current may be interrupted, leading to flickering lights. Tightening the connections or replacing faulty components, such as sockets or switches, can often resolve this issue.
Still, if it’s not the bulb or the socket, you might want to call for a professional to take a look, as voltage fluctuations might cause the flickering.
Electrical voltage should remain relatively stable, but if it fluctuates outside of the normal range, it can cause lights to flicker. Various reasons can cause voltage fluctuations, such as utility grid issues, faulty wiring, or problems with electrical appliances.
Sometimes, contacting your utility provider to address the issue at the source may be necessary.
Buzzing Sounds and Burning Odours From Your Appliances
These signs are pretty obvious, especially the burning odours.
Usually, burning odours are not to be disregarded, regardless of whether they are caused by a forgotten meal in the oven or the oven itself. However, many people ignore the buzzing sound that comes from appliances, thinking it will go away. It will, along with your devices and your home if you are unlucky enough. The buzzing sound may suggest that there is an electrical arc occurring, which can lead to fires if left unaddressed.
Likewise, burning odours may signify overheating wires or faulty components within your appliances. If you notice any of these signs, it is crucial to shut off the affected appliance immediately and contact an electrician to diagnose and resolve the issue.
Call Electrical Services to Help with Repairs
When facing any of the aforementioned signs, seeking professional assistance from a licensed electrician is imperative.
Attempting to repair electrical problems alone can be dangerous and potentially worsen the situation. A qualified technician will certainly have the expertise and tools to diagnose the problem and then provide the appropriate repairs or replacements.
By relying on professional electrical services, you can ensure the safety of your home and prevent any further damage or hazards. And that’s far more important than the few bucks you will save by trying to fix it alone.